Black Myth Wukong System Requirements (Minimum, Recommended & Ray Tracing)

The Black Myth Wukong system requirements call for at least a GTX 1060 6GB or RX 580 8GB, a 6-core CPU, 16GB of RAM, and 130GB of storage (SSD strongly recommended) to run at 1080p on medium settings; the recommended tier needs an RTX 2060-class GPU and an SSD is mandatory for good load times. Below we break down every official tier — minimum, recommended, ultra, and ray tracing — plus how DLSS, FSR, and frame generation affect real-world performance.

Black Myth Wukong System Requirements: Minimum Tier

Game Science’s official specs put the floor for Black Myth: Wukong higher than most action games because of its Unreal Engine 5 Lumen lighting and dense environments. At minimum settings you’re targeting 1080p on Medium presets without ray tracing.

At this tier expect roughly 30fps at 1080p Medium, and you’ll almost certainly need to lean on DLSS, FSR, or XeSS upscaling just to hold a stable frame rate, especially in combat-heavy areas with lots of particle effects. You can always cross-check these figures against the official Black Myth: Wukong Steam store page, which lists the current PC specs directly from the developer.

Black Myth Wukong System Requirements: Recommended Tier

The recommended tier is what most players should aim for if they want a consistently smooth 1080p-to-1440p experience on High settings.

Notice the jump from the minimum tier: the recommended spec explicitly requires an SSD, not just prefers one. On an HDD you’ll see long shader-compile stutters and slow streaming pop-in even if your CPU and GPU are strong enough.

Ultra and 4K Requirements

For players chasing 4K or maxed-out visuals without ray tracing, Game Science and third-party benchmarking sites list a heavier ultra tier.

The CPU listed doesn’t change much between recommended and ultra — this is a game where GPU VRAM and system RAM matter more than raw CPU clock speed. If you’re upgrading a PC specifically for this title, prioritize the graphics card and bumping RAM to 32GB before a CPU swap.

Ray Tracing Requirements

Black Myth: Wukong supports hardware ray tracing (ray-traced shadows and reflections, plus a Lumen-based global illumination mode), and the requirements jump considerably once it’s enabled.

Ray Traced Shadows is generally considered the best-value ray tracing effect — a noticeable visual upgrade for a relatively small performance cost. The full Lumen ray tracing mode only becomes practical from an RTX 4070 / RX 7800 XT and above; below that, the frame rate hit is too steep to justify without frame generation.

Why the SSD Requirement Matters

Every official tier lists 130GB of storage, and from the recommended tier upward an SSD is a hard requirement, not a suggestion. Black Myth: Wukong streams high-resolution textures and geometry continuously as you explore, and mechanical hard drives simply can’t feed data fast enough — the result is stuttering, texture pop-in, and occasionally longer loading screens between chapters. If you’re still on an HDD, a 500GB–1TB NVMe SSD is one of the cheapest upgrades you can make for this specific game, often improving perceived smoothness more than a GPU bump.

DLSS, FSR, XeSS and Frame Generation Explained

Because the recommended specs already assume upscaling in some benchmarks, it helps to understand what each technology does:

• NVIDIA DLSS — available on RTX 20-series and newer; DLSS Frame Generation (RTX 40-series and up, with DLSS 4 improvements on newer cards) can roughly double displayed frame rate with low added latency when paired with NVIDIA Reflex.
• AMD FSR — works on a much wider range of GPUs, including older NVIDIA and Intel cards, but FSR’s frame generation implementation is capped around 60fps and shows more ghosting during fast camera movement or weapon swings than DLSS.
• Intel XeSS — a solid middle-ground upscaler, useful on Arc GPUs and as a fallback on other hardware.

For most builds, a practical rule of thumb by GPU tier looks like this: RTX 4060-class cards should stay at 1080p with DLSS Quality; RTX 4070/RX 7800 XT-class cards are the sweet spot for 1440p with DLSS Quality (and Lumen medium ray tracing); RTX 4080/4090-class cards can comfortably run 4K with DLSS Quality upscaling from an effective 1440p internal resolution.

How to Check If Your PC Can Run Black Myth: Wukong

1. Open Task Manager (Ctrl+Shift+Esc) and check your CPU model plus installed RAM under the Performance tab.
2. Check your GPU model and VRAM the same way, or via the manufacturer’s control panel (NVIDIA App, AMD Software, or Intel Arc Control).
3. Confirm you’re on Windows 10 64-bit or newer with the latest GPU drivers installed.
4. Check free storage — you need 130GB free, ideally on an SSD or NVMe drive.
5. Compare your specs against the minimum and recommended tables above to estimate your target resolution and settings.

Where to Buy Black Myth: Wukong for PC

Once your PC clears the recommended tier, the fastest way to start playing is a genuine Steam key rather than gambling on unofficial download sources. NDWS Market sells authentic, region-appropriate game keys that activate directly on your existing Steam library — no shady installers, no bundled malware, just a real key delivered instantly after checkout. Browse the full video games category to compare current pricing on Black Myth: Wukong and similar AAA titles, or head to the full shop to see everything NDWS Market currently has in stock. If you’re new to key activation, our guide on how to redeem a Steam key walks through the process step by step, and our breakdown of whether grey-market game keys are safe explains why sourcing matters. For a wider comparison of where to shop, see our guide to the best sites to buy game keys.

FAQ

What are the minimum requirements for Black Myth: Wukong?

The official minimum is a GTX 1060 6GB or RX 580 8GB, an Intel Core i5-8400 or Ryzen 5 1600, 16GB RAM, and 130GB of storage on Windows 10 64-bit, targeting 1080p on Medium settings.

Can I run Black Myth: Wukong on a GTX 1060?

Yes, a GTX 1060 6GB meets the official minimum requirement and can run the game at 1080p on Medium settings, though frame rates will hover around 30fps and upscaling (FSR or XeSS) is recommended to keep it stable.

Does Black Myth: Wukong require an SSD?

An SSD isn’t strictly required at the minimum tier but is required for the recommended tier and above. Because the game streams large textures continuously, an HDD will cause noticeable stuttering and pop-in even on otherwise capable hardware.

What GPU do I need for ray tracing in Black Myth: Wukong?

An RTX 3060 (8GB) is the minimum for entry-level ray traced shadows, while the full Lumen ray tracing experience at high settings needs an RTX 4070/RX 7800 XT or better, and RTX 4080 SUPER for the ultra 4K ray tracing tier.

Is 16GB RAM enough for Black Myth: Wukong?

16GB RAM is enough for the minimum and recommended tiers. If you’re targeting the ultra tier, 4K resolution, or heavy ray tracing settings, 32GB is officially recommended to avoid memory-related stutter.

Where can I buy a cheap genuine Black Myth: Wukong Steam key?

NDWS Market sells verified, genuine Steam keys for Black Myth: Wukong and other major titles at competitive prices, with instant delivery so you can start downloading as soon as your PC meets the specs above.